1. Voltage: High___________  Low___________

2. Check All Wiring Connections

3. Evaporator Coil Cleanliness

4. Drains Cleared and Run Properly

5. Test Condensate Pump and Inspect Drain Line

6. Blower Motor amp rating:___________ Actual:__________

7. Blower Capacitor Rating: _________  Actual: ___________

8. Blower Motor Cleanliness

9. Check Wiring in Furnace/Air Handler

10. Check Circuit Board for Burn Marks

11. Temperature Rise: ___________________

12. Condition of Duct Work / Filtration System

13. Thermostat Programmed to Clients Needs

14. Induced draft motor amp rating:______ Actual: _______

15. Clean/test flame sensor

16. Clean pressure switch ports

17. Testing igniter

18. Gas pressure: Low ___________ High __________

19. Check for gas leaks

20. Visual inspection of heat exchanger

21. Check carbon monoxide levels in flue pipe

22. Check carbon monoxide levels in the house

23. Wipe down in and around furnace cabinet

24. Vacuum out furnace cabinet

25. Check humidifier pad

26. Check humidifier operation